Spa Fill Up Procedure - Sundance Spas Camden Owner's Manual

7.0

Spa Fill Up Procedure

FOR BEST RESULTS, READ EACH STEP IN ITS ENTIRETY BEFORE
PROCEEDINg WITH THAT STEP.
1. Prepare The Spa For Filling
• Clear all debris from the spa. (Although the spa shell has been
polished at the factory, you may want to treat it with a specially
formulated spa cleaner. Consult your dealer for additional infor-
mation prior to filling spa.
• Remove filter lid (page 22), then remove filter cartridge from filter
bucket as illustrated in section 11.1 (page 29).
2. Fill Spa
• Place the end of your garden hose into the empty filter bucket.
CAUTION: Never fill with water from a water softener. If
your water is extremely "hard", it is preferable to fill half-
way with hard water and the rest of the way with soft-
ened water. Or, you may fill entirely with hard water if
you use a special water additive available from your
Sundance dealer.
• Fill spa with clean tap water from garden hose until water covers all
jets but does not touch the bottom of the lowest headrest (DO NOT
OVERFILL!)
IMPORTANT: Always fill your spa through the filter
bucket after draining. Failure to do so may cause air
to be trapped in either pump, preventing the pump
from circulating water. Remove the hose and replace
the filter cartridge as illustrated in section 11.1 (page
29).
Page 15