Table of Contents
Advertisement
8.0 Control Functions
8.1 Control Panel
A. LED Display: Can display
current water temperature
(default display), water
temperature set point, selected
filtration/heating mode, and
error messages.
B. Heat Indicator: Lit when heater is on.
C. Warmer ( + ) Button: Increases water temperature set point.
D. Cooler ( - ) Button: Decreases water temperature set point.
E. Jets 1 Button: Turns jets pump #1 on and off. Press once for low
speed; press a second time for high speed; press a third time to turn
pump off.
F. Jets 2 Button: Turns jets pump #2 on and off. Press once for high
speed; press a second time to turn pump off.
G. Light Button Options
•
With standard Incadescent light: Turns underwater light on and off.
•
With optional LED lighting system: Turns underwater light and top rim
accent lights on in one of three random modes or one of seven solid
colors. Refer to section 9.3 (page 20) for details.
Operation Details
•
Temperature Adjustment: 65-104°F (18-40°C). Factory default
setting is 100°F (38°C).
•
Standard light system: Incandescent light runs for 1 hour, then
automatically shut off for increased bulb life.
•
Optional LED light system: All LED lights run for 1 hour, then auto-
matically shut off.
•
Jets 1/Jets 2 Button Operation: Jets run for 20 minutes after
activated, then turn off automatically to conserve energy. Simply
press either jets button to continue operation for an additional 20
minutes.
A
B
C
D
E
F
G
Page 17
Hide quick links:
Advertisement
Table of Contents
