Sundance Spas Hawthorne Owenrs Manual page 41

7. Source Button: Press Source to change input from audio or CD
mode to auxiliary mode. Press a second time to switch back.
8. Volume Buttons: Press + (Volume Up) or - (Volume Down) to
increase or decrease volume level.
9. SEL Button: Press SEL to choose control function:
1) Bass
2) Treble
3) Balance
4) Fader
5) Volume
To adjust selection, press + (Volume Up) or - (Volume Down). Bass
control: Adjusts the amount of low frequency. Treble control:
Adjusts the amount of high frequency. Balance control adjusts the
amount of sound output to the left and right speakers. Fader control
adjusts the amount of sound output. You can decrease the sound
level of the rear speakers by pressing + (Volume Up). To decrease
the sound level of the front speakers press - (Volume Down). Note:
Bass and Treble settings are available only if EQ is set to DSP Off.
10. Preset 1/Pause Play Button: In tuner mode, any station can
be stored as preset 1 by pressing and holding this button for 2
seconds. To recall the station preset, simply press and
release this button. In CD mode pressing this button will
pause or play the CD.
11. Preset 2/INT Button: In tuner mode, any station can be
stored as preset 2 by simply pressing and holding this button for
2 seconds. To recall the station preset, simply press and
release this button. In CD mode pressing this button will
preview each song on the disc for about 10 seconds. Simply
press again to turn off this feature.
12. Preset 3/RPT Button: In tuner mode, any station can be
stored as preset 3 by simply pressing and holding this button
for several seconds. To recall the station preset, simply press
and release this button. In CD mode pressing this button will
play a song repeatedly. Press again to turn off this feature.
Page 37