Baumatic BHI300 User Manual page 26

o IMPORTANT: Do not use a silicon sealant to seal the appliance
against the aperture. This will make it difficult to remove the hob
from the aperture in future, particularly if it needs to be
serviced.
o The supplied brackets need to be fitted to the fixing points on
the underside of the hob.
o Place a bracket onto each fixing, ensuring that the outer hole
lines up with the hole on the hob.
o IMPORTANT:
holes around the outside of the hob.
YOU MUST ensure that these holes are
not blocked by the work top, when you
put the hob into position (see drawing
opposite).
o Carefully turn the hob upside down and
place it on a cushioned mat.
o Apply the sealing strip provided around
the edge of the appliance.
o The protective
removed from both sides.
o Do not leave a gap in the sealing agent
or overlap the thickness.
26
There are ventilation
covering must be