Automatic Safety Cut-Off; Suitable Cookware - Baumatic BHI300 User Manual

Automatic safety cut-off

o The automatic safety cut-off is activated when a cooking zone
has been left on longer than the maximum default working
time. This is a safety function in the event of the hob being left
on accidentally.
o The default working times for the various power levels are
shown in the table below.
Power level
Default working time (hours) 8 8 8 4 4 4 2 2 2
o If the pot has been removed from the cooking zone, the
induction hob will stop heating immediately and the hob will
automatically switch off after 2 minutes.

Suitable cookware

o You should only use cookware with a base that is suitable for
induction cooking. Look for the induction symbol on the
packaging or on the bottom of the pan.
o If you do not have a magnet, you can fill the pan with water and
place it on a cooking zone. If
and the water is heating, the pan is suitable.
o Cookware made from pure stainless steel, aluminium or copper
without a magnetic base, glass, wood, porcelain, ceramic and
earthenware are not suitable.
o Do not use cookware with jagged edges or a curved base.
o Make sure that the base of your pan is smooth, sits flat against
the glass and is the same size as the cooking zone.
1 2 3 4 5 6 7 8 9
o You can check whether your cookware is
suitable by carrying out a magnet test.
Move a magnet towards the base of the
pan. If it is attracted, the pan is suitable
for induction.
does not flash in the display
18