Table of Contents
Advertisement
Preparation
Replace drum unit
As soon as the ""drum operating time"
warning lamp
(see page
2) lights up on
your fax machine, you should ensure that a
new drum unit is near to hand. The "DRUM
LIFE WARNING" message in the display
indicates that the fax machine will only
print out a further approx. 300 documents
(depending on the print density). If you fail
to change the drum in this period, the
"REPLACE DRUM" message appears in the
display; this indicates that the fax machine
will not print out any more documents. If
the drum unit is not replaced, incoming fax
documents are saved in memory.
Connection to the mains
Telephone connection
Connect your fax machine (LINE jack) to
the telephone socket, as shown on the
right.
8
GB
Preparation
1. Pull the release button to open the fax
machine.
2. Hold the green handles and remove the
printer unit.
3. Remove the drum unit from the developer
assembly.
• Do not touch the developer roller (the black
roller with a toner coating).
4. Take the new drum unit and insert it into
the developer assembly as detailed in the
drawing.
• Any damage to the printer drum will impair
the image quality. You must therefore never
touch the green drum surface or expose the
drum to direct sunlight for more than three
minutes.
5. Now proceed as described on
fixing roller cleaner is not
not replaced).
not
not
not
Consumables are taken back and
recycled by your TOSHIBA dealer.
page 5
(the
On/off switch
TOSHIBA
TF 631
Advertisement
Table of Contents
