Output Tray - Brother HL-1050 Technical Reference Manual

2/19/04
• When the printer receives this command any unprinted pages are printed and the left, right and top margins
and the text length are set to their factory defaults for the new page size.
• The cursor is moved to the top left of the text area on the new page.
• Depending on your model, you may also set the page size from the printer's control panel or remote printer
console program (see the User Guide).
• If the paper size you select differs from the size of the currently loaded paper, a message appears in the
control panel prompting you to load the selected size of paper (for HL-1660e, 2060, 2400C/Ce, 3400CN,
3260N 2460, 7050, 1850 and 1870N).
Example)
Select letter size:
Select the width of free size paper: Esc&l#G (1/720 inch unit; for HL-3260N, 2460, 7050, 1850, 1870N,
5040, 5050, 5070N, 2600CN and 3450CN)
Select the height of free size paper: Esc&l#F (1/720 inch unit; for HL-3260N, 2460, 7050, 1850, 1870N,
5040, 5050, 5070N, 2600CN and 3450CN)

4.1.2. Output tray

Esc&l#G
# denotes the output tray.
1: Select the printer output tray.
•
3: Select #1 bin.
•
4: Select #2 bin.
•
5: Select #3 bin.
•
6: Select #4 bin.
•
7: Select #5 bin.
•
8: Select #6 bin.
•
9: Select #7 bin.
•
10: Select #8 bin.
•
11: Select #9 bin.
•
12: Select #10 bin.
•
100: Select the finisher tray (HL-3260N)
•
• This command selects the specified output tray.
• This command is ignored when the specified tray is not available.
• The PJL OUTBIN command is ignored when this command is executed.
• If the printer has data to print when this command is executed, the command is valid from the next page
immediately after the data is printed.
Esc&l2A
(27)(38)(108)#(71)
CHAPTER 2 "PCL" - 16
<1Bh><26h><6Ch><32h><41h>
<1Bh><26h><6Ch>#<47h>