Plot Area And Unit Setting Instructions - Brother HL-1050 Technical Reference Manual

Function
Fill type
Fill distance
Fill slant
Pen thickness
Pen condition
Rotation
Scaling points
3.2.

Plot Area and Unit Setting Instructions

Instruction Function
IP Scaling point
SC Scale
IW Input window
RO Rotate coordinate system
PG Page output
IP - Input scaling point
IP [ P1 , P1 [,P2
X Y
P1 ; coordinate of P1
X X
P2 ; coordinate of P2
X X
• The coordinate values used are absolute values in graphics units.
• Sets the location of the scaling points(P1, P2).
• Coordinate values for P1
The IP instruction is ignored when the set coordinates are outside the print area.
• Using this instruction without a parameter field initializes the scaling points(P1, P2).
• P2
and P2 may be omitted. (If P2
X Y
distance between P1 and P2).
SC - Scale
SC Xmin, Xmax, Ymin, Ymax
Xmin ; X coordinate of P1
Ymin ; Y coordinate of P1
• Sets the scale for the coordinates the user wants to establish.
• Coordinate values for Xmin, Xmax, Ymin and Ymax are given as real numbers.
• Using this instruction without a parameter field turns the scaling off.
• The technical terms user unit and graphics unit as used in this manual are defined as follows;
User unit
Graphics unit
10 '*** SCEX ***
20 LPRINT "IN; IP3000,2000,4500,3500;SP1;SC0,120,0,120;"
30 FOR T=0 TO 2*3.1416+3.1416/20 STEP 3.1416/20
40 X=COS(T)*100
50 Y=SIN(T)*100
60 LPRINT "PA";X;",";Y;";PD;"
70 NEXT T
80 LPRINT "PU;"
90 END
Equivalent
Instruction
FT;
FT;
FT;
PT;
PU;
RO;
IP;
P2 ]] [;]
X, Y
P1 ; coordinate of P1
Y Y
P2 ; coordinate of P2
Y Y
, P , and P2 are given as integer numbers.
X 1Y P2X Y
and P2 are omitted, P2 is set automatically so as not to alter the
X Y
Xmax ; X coordinate of P2
Ymax ; Y coordinate of P2
: the unit of the coordinates set by the SC instruction
: the unit (1/1016 of an inch) of the coordinates not set by the SC instruction
<Sample 61>
CHAPTER 9 HP-GL - 7
Condition
Bi-directional fill, type 1
1% of distance from P1 to P2
0 degrees
Set at 0.3 mm
Pen up
Set at 0 degrees
Initialized according to
paper size
2/19/04