Commands; Select Storage Device Command; (For Hl-2060/2400C/2400Ce/3400Cn/2460/3260N/7050/2600Cn/3450Cn Only) - Brother HL-1050 Technical Reference Manual

3.

COMMANDS

3.1

Select Storage Device Command

(For HL-2060/2400C/2400Ce/3400CN/2460/3260N/7050/2600CN/3450CN
Only)
Command
ESC CR ! 12358F Slot No
** Slot No = 1
Slot No = 2 (Slot No. 2 is not used for the HL-2460/3260N.)
Slot No = 3 (Internal HDD)
Default = 1
Available Devices
F, A, H
Description
The card is specified and controlled by the following commands.
For the detailed information on specific card operation commands, refer to the following sections which
describe each command in detail.
Physical Format
Logical Format
Save Primary Font
Save Secondary Font
Save by Type
Save Data
Save Image (Fixed Printing Location)
Execute Data
Save Image (Infixed Printing Location)
Delete All Download Fonts
Delete Download Fonts of Specified ID
Save Download Fonts of Specified ID
Delete All Macros
Delete Macros of Specified ID
Save Macros of Specified ID
Copy Card
Default value is 1 (slot 1). The card is reset to the default value under the following circumstances:-
1) When the printer is turned on.
2) When the printer is reset on the control panel.
Error
N/A
APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 5
Command
ESC CR ! 12340F
ESC CR ! 12341F
ESC CR ! 12343F
ESC CR ! 12344F
ESC CR ! 12345F
ESC CR ! 12347F
ESC CR ! 12348F
ESC CR ! 12349F
ESC CR ! 12350F
ESC * c 1028F
ESC * c 1026F
ESC * c 1029F
ESC & f 1030X
ESC & f 1036X
ESC & f 1038X
ESC CR ! 12357F
2/19/04