Command Group - Brother HL-1050 Technical Reference Manual

3.

COMMAND GROUP

Command Group
Kernel Commands
Job Separation
Commands
Environment
Commands
Status Readback
Commands
Device Attendance
Commands
Command Command Description
UEL Exits current printer language and returns control
to PJL.
EXECUTE Orders the printer to execute the specified
operation.
SUPERUSER Moves to the SUPERUSER mode.
SUPERUSEROFF Exit from the SUPERUSER mode.
WNVRAM Write the specified data to the specified address
of the printer's NVRAM.
RNVRAM Retrieve the data from the specified address of the
printer's NVRAM.
COMMENT Comments can be placed in the command line
ENTER Selects a printer language
JOB Informs printer of job start
EOJ Informs printer of job end
DEFAULT Sets default value
SET Sets an environment value which is available
during a PJL job
INITIALIZE Resets the current and default PJL variables to
factory values
RESET Resets current PJL variables to default values
INQUIRE Requests the current value for a specified
environment
DINQUIRE Requests the default value for a specified
environment
ECHO Returns the <words> to the host computer
INFO Requests a specified category.
USTATUS Allows the printer to send unsolicited status
information
USTATUSOFF Stops the printer sending all unsolicited status
information
RDYMSG Replaces the READY message on the control
panel
OPMSG Displays altered message on the control panel and
takes the printer off-line
STMSG Displays altered message on the control panel and
takes the printer off-line. If status readback is
enabled, returns name of the key.
CHAPTER 5 PJL - 9
2/19/04