Brother HL-1050 Technical Reference Manual page 227

3. EPSON-Specific Variables
The following values are EPSON (EPSON FX-850 emulation) specific and can be set and requested using
PJL. These variables must be set using the LPARM : EPSON option.
Variables Description
PAPER Sets the paper size.
ORIENTATION Sets the orientation.
LEFTMARIN Sets the left margin
RIGHTMARGIN Sets the right margin
TOPMARGIN Sets the top margin
BOTMARGIN Sets the bottom margin.
FORMLINES Sets the number of lines.
FONTSOURCE Sets the font source to Internal
fonts or Permanent Soft Fonts
FONTNUMBER Sets the font number
PITCH Pitch of the default font in units of
characters per inch. The pitch value
can be specified to two decimal
places
PTSIZE Height of the default font in units
of points. The point size can be
specified to a quarter of a point
Sample Value Range
LETTER, A4, LEGAL, B5,
EXECUTIVE, COM10,
MONARCH, C5, DL, JISB5,
A4LONG (All models)
A5, A6, B6 (HL-1650/1670N/
2460/7050/1850/1870N/5050/
5070N)
A3, A5, A6, LEDGER, JISB4,
LTRS, EXECUTIVES, B5S
(HL-3260N)
ANY, DLL, POSTCARD,
ORGANIZERJ, ORGANIZERK,
ORGANIZERL, ORGANIZERM,
FOLIO, USERDEF (HL-1850/
1870N/5050/5070N)
PORTRAIT, LANDSCAPE
0 to 126 (HL-1050/1070/1250/
1270N/1450/1470N/P2500/3260N/
2460/7050)
0 to 145 (HL-1650/1670N/1850/
1870N/5050/5070N)
0 to 136 (HL-1050/1070/1250/
1270N/1450/1470N/P2500)
10 to 155 (HL-1650/1670N/1850/
1870N/5050/5070N)
10 to 136 (HL-3260N/2460/7050)
0, 0.33, 0.5, 1.0, 1.5, 2.0 inch
0, 0.33, 0.5, 1.0, 1.5, 2.0 inch
5 to 128 lines
I C1, C2, S (HL-3260N/2460/7050)
0 to n (HL-
1050/1070/1250/1270N/
1450/1470N/P2500)
0 to 0x7FFFFFFF (HL-1650/
1670N/3260N/2460/7050/1850/
1870N/5050/5070N)
0.44, 0.45, .......99.99
4.00, 4.25, .......999.75
CHAPTER 5 PJL - 29
2/19/04