Brother HL-1050 Technical Reference Manual page 182

2/19/04
• The command sets all pen widths to a default of 0.35mm.
command.
• Using the command with no parameter defaults the type to 0 (metric) and all pen widths to 0.35mm.
• The unit type is not affected by a DF command.
10 '-Pen Width Unit Selection-
20 WIDTH "LPT1:", 255
30 LPRINT CHR$(27); "E";
40 LPRINT CHR$(27); "%0B";
50 LPRINT "IN;SP1;";
60 'metric
70 LPRINT PA2000,6000;PDPA6000,6000;PU;" 'Default 0.35mm
80 LPRINT "WU0;PA2000,5700;PDPA6000,5700;PU;"'0.35mm
90 LPRINT "WU0;PW1.5;PA2000,5400;PDPA6000,5400;PU;"'1.5mm
100 LPRINT "WU0;PW0.8;PA2000,5100;PDPA6000,5100;PU;"'0.8mm
110 "-relative unit
120 LPRINT "PW;PA2000,4600;PDPA6000,4600;PU;"'Default 0.35mm=4dot
130 LPRINT "IP1000,1000,9000,7000;"
140 LPRINT "WU1;PA2000,4300;PDPA6000,4300;PU;"'300*10/1016=2dot
150 LPRINT "IP1000,1000,5000,4000;"
160 LPRINT "WU1;PA2000,4000;PDPA6000,4000;PU;"'300*5/1016=1dot
170 LPRINT CHR$(27); "%0A";
180 LPRINT CHR$(27); "E";
190 END
<Sample 47>
7.6. Character Plot Instructions
Instruction
SD
AD
SS
SA
FI
FN
LB
DT
LO
DI
DR
DV
CP
CF
SI
SR
SL
SB
ES
TD
Function
Define Standard Font
Define Alternate Font
Select Standard Font
Select Alternate Font
Select Primary Font
Select Secondary Font
Define Label
Define Label Terminator
Label Origin
Absolute Direction
Relative Direction
Define Variable Text Path
Character Plot
Character Fill Mode
Set Absolute Character Size
Set Relative Character Size
Set Character Slant
Scalable or Bitmap Fonts
Extra Space
Transparent Data
CHAPTER 4 HP-GL/2 - 38
Hence it should be used before the PW