Additional Required Items; Suggested Field Equipment And Supplies; Contents; Section 1: Building The Boat Stand - Pro Boat Blackjack 26 Assembly Manual

Limited Warranty and Limits of Liability (continued)
Germany
Electronics and engines requiring inspection or
repair should be shipped to the following address:
Horizon Technischer Service
Otto Hahn Str. 9a
25337 Elmshorn
Germany
Please call +49 4121 46199 66 or
service@horizonhobby.de with any questions or
concerns regarding this product or warranty.

Additional Required Items

Although the Blackjack 26 SS comes fully assembled and ready for action, you will need a few tools to get
your boat ready to run. You will need the following:
Blue Thunder™ 20% Fuel (quart) (DYN2320)
500cc Fuel Bottle (DYN2003) or
Fast Tap™ Quart Bottle Spout (DYN2009)
Glow Plug Wrench (DYN2510)

Suggested Field Equipment and Supplies

In addition to the items needed to run the Blackjack 26 SS, we recommend that you carry the following in
your field box:
Engine Tuning Screwdriver (DYN2775)
Replacement Glow Plugs (DYN2508 or DYN2500)
Hex driver/Allen wrench (2.5mm)
Cable grease to lubricate drive shaft (PRB0100)
Ni-Cd Glow Driver (DYN1925)
12 AA alkaline batteries (8 for the transmitter and
4 for the receiver)
7.2V Battery (DYN1000) for electric starter
Battery Charger (DYN4051) for electric starter
Clean towels
AA alkaline batteries
Adjustable wrench (small)
Extra propellers
6
• Assembled Blackjack 26 SS Nitro RTR
• Pro Boat radio transmitter
• Boat stand
• Electric engine starter

Section 1: Building the Boat Stand

 1. There are 4 plywood pieces. The 2 short
plywood pieces are the ends of the boat stand.
 2. Attach the 2 long plywood pieces of the
interlocking boat stand to the end of one of the
short plywood pieces. Repeat with the remaining
short plywood piece.
 3. Secure the interlocking boat stand with thick
CA or epoxy.

Contents