Printer Location Requirements - Canon Laser Shot LBP-1120 Getting Started Manual

Preface
Conventions
The following symbols are used in this manual to explain procedures,
restrictions, handling precautions, and instructions that should be observed
for safety.
CAUTION
Indicates a caution concerning operations that may lead to injury to persons
or damage to property if not performed correctly. In order to use the printer
safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read these
items carefully in order to operate the printer correctly, and to avoid damage
to the printer.
NOTE
Indicates a clarification of an operation, or contains additional explanations
for a procedure. Reading these notes is highly recommended.
Copyright 2002 by Canon Inc. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying and
recording, or by any information storage or retrieval system without the prior
written permission of Canon Inc.
Notice
Canon makes no guarantees of any kind with regard to this manual. Canon
shall not be held liable for errors contained herein or for consequential or
incidental damages incurred as a result of acting on information contained in
the manual.
1
Trademarks
LBP, Canon, LASER SHOT, and the Canon Logo are trademarks of Canon Inc.
Microsoft ® , Windows ® , Windows logo, and MS-DOS are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or in
other countries.
Other product or company names herein may be the trademarks of their respective
owners.
Location

Printer Location Requirements

Observe the following power requirements when you use the printer:
100 - 127 V (±10%) 50/60 Hz (±2 Hz)
220 - 240 V (±10%) 50 Hz (±2 Hz)
This printer's energy consumption is no more than 736 W for 100 - 127 V model
(634 W for 220 - 240 V model). Install the printer in a place where there is an
individual power outlet that can provide an adequate power supply.
Observe the following environmental requirements when you use the printer:
Temperature: 10°C - 32.5°C (50°F - 90.5°F)
Relative humidity: 20 - 80% RH with no condensation
The dimensions of the printer are as follows. When selecting the site for the printer,
the location should provide ample space for the printer as illustrated below.
Dimensions Space required for installation
Top view
763 mm
60 mm
356 mm
Front
Legal-size paper
(for Face-up delivery)
297 mm
A4-size paper
(for Face-up delivery)
60 mm
100 mm
Side view
307 mm
100 mm
763 mm