Canon Laser Shot LBP-1120 Getting Started Manual page 15

Solving Problems with the CAPT Installation
The screens shown in the instructions below are from Windows 98.
1
Make sure the printer is connected to your computer using a USB cable and
the printer is turned on.
2
Select [Start], [Settings], then [Control Panel]. Open the [System] dialog box
in the [Control Panel].
For Windows XP, select [Performance and Maintenance] from the [Control Panel]
in the [Start] menu, and then click [System].
3
Select [Device Manager] tab and double-click [Universal Serial Bus
controllers].
For Windows 2000/XP, select [Hardware] tab and click [Device Manager]. Then
double-click [Universal Serial Bus controllers].
4
Delete only the following USB drivers under [Universal Serial Bus controllers].
For Windows 98, select [Canon LASER SHOT LBP-1120]. For Windows Me, select
[Canon CAPT USB Printer], and click [Remove]. For Windows 2000/XP, select
[USB Printing Support] or [Canon CAPT USB Printer], and uninstall from the
[Action] menu.
14