For Windows Xp - Canon Laser Shot LBP-1120 Getting Started Manual

7
Click [Next] on [Driver Files Search Results].
Click [Yes] if the [Digital Signature Not Found] dialog box appears.
8
When the installation is complete, the following dialog box appears. Click
[OK] to close the dialog box.
Click [Finish] on the [Found New Hardware Wizard] dialog box.
When the installation is complete, see on p. 13.
If you cannot install the software, see on p. 14.

For Windows XP

IMPORTANT
Before you install the software, make sure that the printer is connected to
your computer using a USB cable and the printer is turned on.
1
Turn on your computer, and then start Windows XP.
Plug & Play is being carried out and the USB driver, [USB Printing Support] is
automatically detected and installed.
2
Log on as the Administrator.
NOTE
Full access rights are necessary for the installation of the CAPT.
3
The [New Hardware Found] dialog box appears, and then the [Found New
Hardware Wizard] dialog box appears.
Check [Install from a list or specific location (Advanced)] and insert the User
Software CD-ROM into the CD-ROM drive, and then click [Next].
NOTE
[Unknown] may be displayed as the name of the device.
12