Installing The Handset Battery Pack; Charging Batteries; Charging The Handset Battery Pack; Battery Hot Swap - NEC Dterm Cordless Lite II Owner's Manual

Dterm cordless lite ii (dth-4r-1)
Table of Contents

Advertisement

Document Revision 2
3.
S
8
C
ECTION

Charging the Handset Battery Pack

The rechargeable battery pack must be fully charged before using the D
Cordless Lite handset for the first time.
1.
2.

Battery Hot Swap

The battery can be hot swapped while a conversation is taking place. The
battery must be changed within 20 seconds otherwise, connection will be lost.
Refer to
instructions for changing batteries.
3 - 14
Replace the cover and slide it up until it latches onto the handset.
Figure 3-18 Replacing the Battery Cover
B
HARGING
ATTERIES
Charge the battery pack without interruption for five to eight hours.
Place the handset in the slot of the charging unit.
Make sure the CHARGE indicator lights. If the CHARGE LED does not
come on, check to see if the AC adapter is plugged in and that the handset is
making good contact with the charging contacts on the charging unit.
The CHARGE LED lights red during and after charging the handset
with the battery.
Section 7 Installing the Handset Battery Pack on page 3-12
NEC Unified Solutions, Inc.
term
Installing the D
Cordless Lite II
term
for

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dth-4r-i

Table of Contents