Introduction; Product Manual Safety Information - Magnetek Enrange CAN-6 Instruction Manual

1.0

INTRODUCTION

Thank you for your purchase of Magnetek's Enrange
These instructions are to be used as a reference for personnel operating the Enrange
Wireless Receiver and the equipment that this Enrange
to.
The user of these instructions should have basic knowledge in the handling of electronic equipment.
1.1

PRODUCT MANUAL SAFETY INFORMATION

Magnetek, Inc. (Magnetek) offers a broad range of radio remote control products, control products and
adjustable frequency drives, and industrial braking systems for overhead material handling applications.
This manual has been prepared by Magnetek to provide information and recommendations for the
installation, use, operation and service of Magnetek's material handling products and systems (Magnetek
Products). Anyone who uses, operates, maintains, services, installs or owns Magnetek Products should
know, understand and follow the instructions and safety recommendations in this manual for Magnetek
Products.
The recommendations in this manual do not take precedence over any of the following requirements relating
to cranes, hoists and lifting devices:

Instructions, manuals, and safety warnings of the manufacturers of the equipment where the radio
system is used,

Plant safety rules and procedures of the employers and the owners of facilities where the Magnetek
Products are being used,

Regulations issued by the Occupational Health and Safety Administration (OSHA),

Applicable local, state or federal codes, ordinances, standards and requirements, or

Safety standards and practices for the overhead material handling industry.
This manual does not include or address the specific instructions and safety warnings of these
manufacturers or any of the other requirements listed above. It is the responsibility of the owners, users and
operators of the Magnetek Products to know, understand and follow all of these requirements. It is the
responsibility of the owner of the Magnetek Products to make its employees aware of all of the above listed
requirements and to make certain that all operators are properly trained. No one should use Magnetek
Products prior to becoming familiar with and being trained in these requirements.
FOR INFORMATION ON MAGNETEK'S PRODUCT WARRANTIES BY PRODUCT TYPE, PLEASE VISIT
WWW.MAGNETEKMOBILEHYDRAULIC.COM.
®
brand CAN-6 Radio Wireless Receiver.
®
brand CAN-6 Radio Wireless Receiver is attached
WARRANTY INFORMATION
®
brand CAN-6 Radio
Enrange CAN-6 Instruction Manual
September 2011
Page 3 of 24