Receiver Channel Configuration Settings (Dip Switch Bank 2) - Magnetek Enrange CAN-6 Instruction Manual

4.3

RECEIVER CHANNEL CONFIGURATION SETTINGS (DIP SWITCH BANK 2)

The channel can be set on the CAN-6 receiver via the Bank 2 dip switches. The
following sections (Sections 4.3.1 through 4.3.3) show the channels or protocols available
for each radio frequency option of the CAN-6.
NOTE: See Section 3.4 for instructions on how to remove the CAN-6 module from the
module housing.
Enrange CAN-6 Instruction Manual
September 2011
Page 15 of 24