Quitting The Surveying Function - Magellan ProMark3 RTK Getting Started Manual

30
To save the as-staked position:
• Tap the OK button. This opens a new screen on which
you can now see the Remain field count down. In the
window's title bar is the name of the log file where the
position is about to be saved. Note that a non-editable
Site ID, different from the name of the target point, is
automatically assigned to that position. GNSS Solu-
tions will automatically make the correspondence
between the target point and the saved position.
When Remain=00:00:00, the STORE button appears at
the bottom of the screen (see screen below right).
• Tap the STORE button. This saves the point position
and takes you back to the stakeout screen.
9. Tap Next to display the list of control points from which
you can select a new target point.
10.Resume steps 4 through 7 until all the points have been
staked out, then tap Done to end the stake out survey. This
takes you back to the last displayed navigation screen.
If you have also logged the positions where you placed
your stakes, tapping Done also closes the log file contain-
ing the measured positions of all these points.

Quitting The Surveying Function

Press the MENU key and tap Exit. This takes you back to the
ProMark3 RTK workspace.