Magellan ProMark3 RTK Getting Started Manual page 43

Stakeout screen
Next point
Logs the point
Provides access to the detailed
stakeout screen below
Detailed stakeout screen
Point to be staked out
Your current position
and heading
3. Once you have chosen a point, tapping on the OK button
will display a graphic screen from which you can easily
stake out your point:
Takes you back to the point
selection screen
The target radius is automatically changed as the distance
from you to the point changes.
When getting closer to the point, markers appear at the
four corners of the target (see below left) informing you
that you nearly are on the point. You can now set the stake
and log the position of this point.
4. Tapping on the STORE button allows you to start perform-
ing measurements to determine the position of the point.
Configures general
case of point logging
Provides access to
monitor screen
Point to be staked out (target)
Your current position and
heading
Used to select which guidance
data to display
Used to select which data to
display for the point:
coordinates or quality data
37