Working On Field Data Collected With "Mobile Mapping; Downloading Gis Data - Magellan ProMark3 RTK Getting Started Manual

- Select Tools>Preferences and make sure Show RTK
functions is enabled otherwise check it and then click
OK.
- From the menu bar, select Project>Download Positions
from External Device.
- In the dialog that opens, select RTK Results in the left
pane and then FAST Survey data collector in the right
pane.
- Click OK. This opens the Data Transfer dialog box.
- Select the PC port connected to the ProMark3 RTK
(USBx) and then click OK. A new dialog appears listing
the .crd job files stored in the ProMark3 RTK.
- Click on the job you want to download. The name of
the selected job appears in the upper field.
- Click OK. The job is then downloaded to the project
open in GNSS Solutions. On the PC, a job folder is
created in the open project folder to store all the
downloaded files. At the end of the transfer, the job
results can be seen on the project's Survey view.
Working on Field Data
Collected With "Mobile Mapping"

Downloading GIS Data

Follow the same procedure as when you download raw data
files. See Downloading Raw Data on page 62. The only differ-
ences are:
1. On the ProMark3, run the Mobile Mapping application
instead of the Surveying application before running the
office software. On the PC, select Start>Pro-
grams>MobileMapper Office>MobileMapper Transfer from the
Windows task bar. This runs the Download utility.
2. The files you need to download are those with the MMJ
extension.
67