Magellan ProMark3 RTK Getting Started Manual page 28

For step 7, you need to
know your NTRIP connec-
tion profile (host, port,
login, password).
Please contact your
NTRIP provider if you
don't know these parame-
ters.
22
7. To choose a station from which to receive RTCM correc-
tions:
• Tap on the NTRIP Settings window. The NtripCaster Con-
nection window opens in which you can store several NTRIP
configurations.
• To enter your first NTRIP configuration, with New selected in
the NTRIP Configuration field, tap on the Add button and
then enter the following parameters:
- Name: NTRIP Configuration Name (freely choose a name)
- Host: Host IP address
- Port: Port number
- Login: User name
- Password: User password
• Tap OK. The name of the configuration you have just created
is now pre-selected in the NTRIP Configuration field. Tap OK
again. This takes you back to the NTRIP Settings window (see
example opposite).
• Set the Network and Station fields to select the base to work
with.
• Tap OK. This takes you back to the DGPS Configuration win-
dow. On top of the screen, you can read part of the settings
you have just made.
• Tap the Connect button. The DGPS Configuration screen now
indicates the amount of incoming data packets (bottom of the
screen) as well as the status of the DGPS mode (top of the
screen).
• Tap OK to close the DGPS Configuration window. The follow-
ing two messages are displayed successively: "
Processing incoming data packets...
and "
• Tap OK to close the message window.
Please wait...
"
".