Wideye SABRE I User Manual page 69

II. Operation
a) Charging the Secondary Battery Pack:
i. Connect up the external battery and cable accessories as shown in the above setup.
1) Attach the power tip of the AC adapter to the charging port of the battery pack.
2) Insert the AC Plug into the wall outlet.
3) The charging indicator will be Red during charging and turn Green when charging completes.
Note: Do not let the battery pack supply power to SABRE™ I when the battery pack is undergoing
charging. This will increase charging efficiency and completes charging in a shorter time.
b)Using the Secondary Battery Pack
i. Press the "Power" switch button on the battery pack and check the LED Indicator. If only one light
is on or no light is on please charge the battery pack first (See charging the Secondary Battery Pack).
ii.
Charging port of the battery pack with the
power tip of the AC adaptor plug into it.
FIGURE 5.5-2: Setup for charging the Secondary
Battery Pack
DC Supply output with
output cable attach to it
FIGURE 5.5-3: Setup for using the Secondary Battery
Pack to supply power to SABRE™ I
AC adapter
Output
Cable
Converter
Tip
Set
66