Select Obtain an IP address automatically and Obtain DNS server address automatically and click OK.
IV.
V.
Close all the windows.
4.5.2.3
Proceed with the following steps to active a Data connection:
I.
I.From the LCD, use the Up/Down buttons to select
Menu > Settings > Interfaces > Ethernet >
Connectivity > and Press ENTER
II.
Use the Up/Down buttons to select Options >
Automatic if you need an automatic Data connection
after reboot and Press ENTER.
Select Options > Manual if you want to make the
III.
connection manually at the time you need it.
IV.
Use Connect or Disconnect to activate or deactivate
a data connection respectively.
If Options > Automatic is selected, unplugging and
V.
re-plugging the Ethernet cable will also activate the
Data connection.
41
FIGURE 4.5.2.3-1: LCD Display of SABRE™ I showing
that a successful IP connection has between
established after network parameter configuration.