Using Wireless Devices With Sabre™ I - Wideye SABRE I User Manual

4.4 Using Wireless Devices with SABRE™ I
4.4.1 Using the Bluetooth Headset
I. Perform the pairing and connection procedures
before proceeding with the following. (Enabling
Bluetooth on SABRE™ I, Bluetooth device pairing
and connection procedures are found in Section
4.3 Bluetooth Settings on SABRE™ I.)
II. Making phone calls via Phonebook –
a. Use the Up/Down buttons to select
press ENTER.
b. Scroll to the calling party's name and press
ENTER.
c. Press the Connect button on the Bluetooth
Headset to listen to the dial tone.
d. Use the Up/Down buttons to select
e. Press ENTER to start the dialing sequence.
37
FIGURE 4.4.1-1: Figure showing the wireless
connectivity of the Bluetooth Headset with SABRE™ I.
and
FIGURE 4.4.1-2: SABRE™ I in the ready state.
FIGURE 4.4.1-3: LCD Display of SABRE™ I showing
the contents of the Phonebook.
FIGURE 4.4.1-4: LCD Display of SABRE™ I showing the FIGURE 4.4.1-4: LCD Display of SABRE™ I showing the
user's choice of a phone number from the phone book. user's choice of a phone number from the phone book.
.
Call
FIGURE 4.4.1-5: Photograph of the bluetooth headset
showing the location of the Connect Button.
FIGURE 4.4.1-6: Photograph of the LCD display showing
user selection of the "Call" button before the selection
of the "Enter" button to start the dialing sequence.
Connect
Button