Wideye SABRE I User Manual page 48

XI. Status
a) From Interfaces , select Ethernet >Status. The
LCD display will show the connectivity mode
and Local IP address status.
XII. Telephony Settings
a) From the Ready State screen, select Menu >
Settings > Interfaces > Telephony. Continue
with the following:
i. Select Enable to enable Telephony feature.
ii. Select Disable to disable Telephony feature.
iii. Select Caller ID standard > USA standard
or Europe standard > press ENTER. SABRE™ I
will set to the new standard.
XIII. My Terminal
From the Ready State screen, select Menu >
Settings > My terminal.
a) To view the current GPS status, select GPS
status. The LCD display will show the current
Lat/Long position.
b) To view the IMEI number, select IMEI number.
c) To view the IMSI number, select IMSI number.
d) To view the current software version, select
Software version.
e) To view the current hardware version, select
Hardware version.
f) To view the manufacturer's name, select
Manufacturer.
g) To view the SIM card number, select Own number.
XIV.
Tone Settings
Configure the alert tones for the Key, Warning,
Ringing and Message.
a) From the Ready State screen, select Menu >
Settings > Tone > Key tone, Warning tone,
Ring tone or Message tone.
b) To select the tone types, select Tone and
choose from the available 5 melodies with the
Up/Down button and press ENTER to save the
new melody.
45