Chapter 4 Using The Sabre; Call Functions - Wideye SABRE I User Manual

4
Using The SABRE

4.1 Call Functions

4.1.1 Making a phone call using the Corded Analog Handset
I. Connect the Corded Analog Handset to SABRE™ I
via the Corded Analog Handset (RJ11 phone) port.
II. Making phone calls directly –
a) With SABRE™ I in the ready state, using the
Corded Analog Handset: Press the
to the dial tone before dialing and dial the
calling party number in the following format;
<00> <Country Code> <Telephone Number> <#>.
III. Making phone calls via Phonebook –
a) Use the Up/Down buttons to select
b) Scroll to the calling party's name and
Press ENTER.
c) Press the
Handset to listen to the dial tone.
d) Use the Up/Down buttons to select
e) Press ENTER to start the dialing sequence.
33
TM
to listen
button on the Corded Analog
Call
I
FIGURE 4.1.1-1: Figure showing the connection of
the Corded Analog Handset to the RJ-11 Interface
of SABRE™ I.
FIGURE 4.1.1-2: SABRE™ I in the ready state.
Icon.
FIGURE 4.1.1-3: LCD Display of the SABRE™ I
showing the contents of the phone book.
.
FIGURE 4.1.1-4: LCD Display of the SABRE™ I showing
the user's choice of a phone number from the
phone book.
RJ11