Wideye SABRE I User Manual page 67

5.2 SB1/AH100 Corded Analog Handset
I. Features
a. General Features
Stylish design
Inuse LED
Last Number Redial
Handset volume setting
DTMF dialing
Mute
Flash
II. Operation
a) Connection and use of the SB1/AH100 Corded
Analog Handset
i. Connect the curl cord to the BGAN RJ11
socket (See Figure 3-2).
ii. You will hear a click when the modular plug
is in place.
iii.Press the Off hook button and listen for the
dial tone.
iv.Once a dial tone is heard, your telephone is
operational.
v. Press the On hook (red) button to on hook
the phone.
b)Other operations
i. Flash Button
During conversation mode, additional
network services such as "Call Waiting" can
be accessed via the use of the flash button.
ii. Redial Button
Press the Off hook button and press the
Redial Button if you wish to redial the last
number dialed.
iii.Volume Control Button
The handset earpiece volume can be
adjusted using VOL + and VOL – button.
Off Hook
Button
Redial
b. Technical Specifications:
Standard: Complex Impedance – ETSI EG201 188
Connector: RJ11
Dimension of Handset: L* W * H = 122*45*24 mm
Weight Of Handset: Approximately 150 grams
Volume
Control
On Hook
Button
Redial
RJ 11/ Phone
Port
64