Creating A Multi-Point Route (Append A New Destination) - BENDIXKing AV80R User Manual

AV8OR User's Guide
Soft Key
Every time a new point is added, the route is recalculated
automatically, and you can start navigating right away.
CREATING A MULTI-POINT ROUTE (APPEND A NEW
DESTINATION)
Multi-point routes are created from simple routes, so a route must be
active first. One of the ways of expanding the route is to add a new
destination. The previous destination becomes the last via point of
the route.
This feature is available in Advanced mode only.
1. Select a new location as you did in the previous sections. This
will be the additional destination in the route.
2. The map appears with the selected point in the middle, and the
Cursor menu opens automatically.
3. Tap
the additional functions.
4. Tap
destination demoting the previous one to the last intermediate
destination.
Pub. No D200803000008
© Honeywell International Inc. Do not copy without express permission of
Action
The route is reversed. The start point becomes the
destination, the destination becomes the start point,
and all via points are to be reached in the opposite
order than before.
The route is optimized. The start point and the
destination remain at their position, but the via
points are reordered to make the shortest possible
route.
The selected point is removed from the route. The
route remains as it was before adding the new
point.
Page 4-56
Honeywell.
Automotive Mode Operation
to open the full Cursor menu with
to add the point as a new final
Rev 2 Dec 2008.