Table of Contents
Advertisement
Installation
Installation
Precautions
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
• Never touch uninstalled telephone wires or terminals unless the telephone line
has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electrical shock from lightning.
• Do not use the telephone to report a gas leak in the vicinity of the leak.
• The socket outlet shall be installed near to the equipment and shall be
easily accessible.
• Never install cables without first switching the power OFF.
• 1TR6 network type is not approved for connection directly to the
telecommunications network. This network type is only to be used
behind a PABX.
• This product complies with directives: LVD 73/23/EC, EMC 89/366/EEC,
R&TTE 99/5/EEC
Connecting cables
1. Power cable
• Connect the power supply to the 'DC in' input on the
system.
• Connect the power cable to the power supply.
• Connect the power cable to an electrical distribution
socket.
TANDBERG Videoconferencing System
10
Advertisement
Table of Contents
