Plu Preset-Code Key Setting (Submode 27); Plu Group Programming (Submode 29) - TEC MA-1535 series Owner's Manual

4. PROGRAMMING OPERATIONS

4.12 PLU Preset-Code Key Setting (Submode 27)

To program keys on the ECR Keyboard as PLU Preset-Code Keys, PLU code can be preset to these
keys.
Anytime outside a sale
CONDITION
OPERATION
Control Lock: SET
27 [#/NS]
NOTES: 1. If "0" is entered as PLU code in the above sequence, the KEY is reset.
2. The [KEY] in the above sequence should be set beforehand.
contact your TOSHIBA TEC representative.
Example) To program the following PLU Codes to required KEYs on the ECR Keyboard.
Key Operation:
1000000010101 [required key] [#/NS]
#/NS
RF
3
0 1 2
C
16 17
13 14 15
7 8
31 32
28 29 30
4 5
46 47
43 44 45
1 2
61 62
58 59 60
0 00
76 77
73 74 75

4.13 PLU Group Programming (Submode 29)

The name of each PLU Group can be programmed here.
CONDITION
Anytime outside a sale
OPERATION
Control Lock: SET
29 [#/NS]
NOTE: Entering 2 digits of numeric code provides an alphanumeric character of PLU Group Name.
Therefore, odd number of numeric digit entry will cause an error. When less than 36 digits
of numeric data are entered, this ECR uses space code entry. If a PLU Group Name
includes spaces at the beginning, entering space code is required at the beginning of data
entry. For the PLU Group Name, up to 18 regular-sized or 9 double-sized characters can
be entered. Also a combination of both types can be entered.
|PLU Code|
Max. 13 digits
(Enter through Numeric Keys
on the ECR Keyboard.
See NOTE 2 below.)
Control Lock: SET
Enter 27, depress the [#/NS] key.
JF
4 5 6 7
X/TIME
18
19 20 21 22
9
33
34 35 36 37
6
48
49 50 51 52
3
63
64 65 66 67
. ST AT/TL
78 79 80 81 82
Repeat for other PLU groups (Max. 99 groups).
|PLU Group Code| [#/NS]
2 digits (01 to 99)
Repeat for other keys.
[KEY]
Depress the required key
on the ECR Keyboard.
(See NOTE 3 below.)
8 9 10 11 12
23 24 25 26 27
38 39 40 41 42
53 54 55 56 57
Map Code
68 69 70 71 72
83 84 85 86 87
Character entry [AT/TL]
Max. 18 characters
(See NOTE below.)
4-20
4.12 PLU Preset-Code Key Setting (Submode 27)
[#/NS]
For details, please
TEC
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
24-01-2002
PRG
056
0033
EO1-11148
STORE
#0000
27
1000000010101
15:06TM
[#/NS]