AMBROGIO BASIC User Manual page 34

5-Press one of the
keys "+", "-" to set
the mowing end
time.
6-Press the key "En-
ter" to confirm.
The
moves on to the
next position.
7-Press one of the
keys "+", "-" to set
the mowing end
GB
minutes.
8-Press the key "En-
ter" to confirm.
SECONDARY AREA 1: function
to define automatic mowing of a
secondary area 1.
Programme the time that the ro-
bot takes to reach the secondary
area along the perimeter wire.
Keep to the following instructions
to detect the time:
1-Position the robot outside the
recharging base in the direc-
tion of the wire in output.
2-Press the keys ON, PAUSA
and CHARGE to start the ro-
bot.
3-Measure
that the robot takes to
reach the
point of the secondary
area route.
Important
If along the route to
reach the
area rapid
have been set, it is nec-
essary to manually carry
cursor
the time
half-way
SECONDARY
secondary
AREA 2
re-entries
On the display the
"WORK TIMETABLE
2" function appears.
WORK TIMETABLE 2: function for set-
ting the second robot activity time slot
during the day.
To programme the work timetable for
the second time slot of the day (example
from 19.00 to 22.00) repeat the same
procedure indicated for "WORK TIMETA-
BLE 1".
On completion of the
procedure, the "SEC-
ONDARY AREA 1 -
No. Cycles" function
appears on the display.
perimeter wire
MAIN AREA
SECONDARY
AREA 1
- 34 -
IDM - 41501711300.tif
IDM - 41501711500.tif
User's manual