Automatic Cycle Start - AMBROGIO BASIC User Manual

11-Press one of the
keys "+", "-" to set
the first number.
12-Press the
"Enter" to con-
firm. The cursor
moves on to the
next position.
Repeat the procedure to set all the num-
bers of the password.
GB
Important
Repetition of the password insertion
procedure is used to be sure that it has
been set correctly. To avoid forgetting
the password, we recommend choos-
ing a combination that is easy to re-
member.
When the procedure
has been completed,
on the display the
"PASSWORD START-
ING" function appears.

AUTOMATIC CYCLE START

Automatic cycle start-up is car-
ried out when operational activity
first starts or after a period of in-
activity.
1-Press key ON.
2-Insert the password (if re-
quested) (see "Enter pass-
word").
3-If the robot is started up for
the first time, it is necessary to
carry out programming. If, on
the other hand, the robot is
started up after a period of in-
activity, it is necessary to
check that the programmed
key
PASSWORD STARTING: function for
programming or not the password in-
sertion request each time the robot is
switched off and restarted after a peri-
od of inactivity (example, remessage
for winter season).
1-Press one of the keys "+", "-" to acti-
vate or deactivate the functions.
No: after a period of inactivity, the robot,
with each re-ignition, starts up and be-
gins operations without the password
having to be inserted.
Yes: after a period of inactivity, the robot,
with each re-ignition, does not start up
and does not begin operations until the
password has been inserted.
2-Press the key "En-
ter" to confirm.
3-Press the key "Pausa" to memorise
the settings and exit the program-
ming phase.
At this point, the robot is ready to use
(see "Automatic cycle start").
Key
"ON"
- 38 -
IDM - 41501703000.tif
User's manual