Maintenance Reminders; Operating Reminders; Programmed Maintenance Intervals Chart; Ordinary Maintenance - AMBROGIO BASIC User Manual

OPERATING REMINDERS

Here below are some indications to fol-
low during the use of the robot.
– Even after a proper reading of instruc-
tions, at its first use, simulate some
test moves to detect the controls and
the main functions.
– Check that the nuts and bolts secur-
ing all main parts are tight.
– Carry out a frequent trimming of the
lawn to avoid an excessive growing of
the grass.
– Do not use the robot to trim grass
GB
higher than 10 cm.
– If the lawn is equipped with an auto-
matic irrigation system, programme

MAINTENANCE REMINDERS

Important
During maintenance operations, use
the individual protections indicated by
the Manufacturer, especially when in-
tervening on the blade.

PROGRAMMED MAINTENANCE INTERVALS CHART

Frequency
Every week
Every month

ORDINARY MAINTENANCE

Component
Blade
Battery recharge
knobs
Contact plates
Robot
the robot so that it re-enters the re-
charging station at least 1 hour be-
fore the start of irrigation.
– Check the ground gradient and make
sure that it does not exceed the maxi-
mum values allowed so that the use of
the robot does not cause dangers.
– The lawn mower should be pro-
grammed in order to prevent it from
working more than necessary; always
consider the different growth of the
grass according to the season in or-
der to avoid a useless wear of the
lawn mower and a decrease in the
battery life.
Before performing maintenance opera-
tions, make sure that the robot has
stopped in safety conditions (see "Ro-
bot safety stop").
Type of operation
Clean and check the
efficiency of the blade
If the blade is bent due
to an impact or if it is
worn-out, replace it.
Clean and remove any
oxidations
Clean and remove any
oxidations
Carry out cleaning
- 48 -
Reference
See "Robot
cleaning"
See "Replace the
blade"
See "Robot
cleaning"
See "Robot
cleaning"
See "Robot
cleaning"
User's manual