AMBROGIO BASIC User Manual page 51

Problem Causes
Damaged cutting blade
Cutting blade flooded by
residues (tapes, ropes,
plastic fragments, etc.).
The start of the robot oc-
curred with obstacles
The robot is very
being too close (less than
noisy
m away) or in presence
of unexpected obstacles
(fallen branches, forgot-
ten objects, etc.).
Electrical motor malfunc-
tion
Grass too high
Erroneous position of the
perimeter wire or re-
charging station power
The robot does not
supply cable.
position itself cor-
rectly inside the re-
charging station
Ground subsidence near
the recharging station
The robot behaves
in an anomalous Perimeter cable incor-
manner around rectly placed.
the flower beds.
Wrong clock setting
The robot works at
erroneous times
Wrong work timetable
setting
The robot does not
Rapid re-entry not cor-
carry out rapid re-
rectly set
entry
Solutions
Replace the blade with a new
one (see "Replace the blade")
Stop the robot in safety condi-
tions (see "Robot safety stop")
Use protection gloves to
avoid the risk of cuts on
hands.
Remove the flood cause from
the blade.
Stop the robot in safety condi-
tions (see "Robot safety stop")
Remove the obstacles and re-
start the robot (see "Manual
startup and stop of robot (in
closed areas)")
Get the motor repaired or re-
placed by the nearest authori-
zed Assistance centre.
Increase the cutting height
(see "Adjusting the cutting
height")
Carry out preliminary cutting
of the area with a normal lawn
mower.
Check the conneciton of the
recharging station (see "In-
stallation of recharging sta-
tion and transmitter-power
supplier group")
Position the recharging sta-
tion on a flat and stable surfa-
ce 8see "Equipment
installation planning")
Relocate the perimeter wire
correctly (anticlockwise direc-
tion) (see "Perimeter wire in-
stallation")
Reset the robot clock (see
"Programming mode")
Reset the work timetable (see
"Programming mode")
Check the exact setting of the
rapid re-entry (see "Setting
for rapid robot re-entry into
the recharging station")
- 51 -
Caution
User's manual
GB