REMOVING THE DOOR, DOOR GASKET, AND TOP COVER
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug ice maker or disconnect power.
2.
To remove the ice maker door:
a) Remove the 3/8" hex-head hinge pin
from the bottom hinge.
b) Pull the bottom of the door out and
remove the door from the cabinet.
Hinge Pin
4-22
3.
To remove the door gasket, grasp the
gasket, and pull it out of the door channel.
4.
To remove the top cover:
a) Remove the two screws from the front
of the cover.
b) Lift the front of the cover, unhook the
rear edge from the clip, and remove the
cover.
Unhook
Door Gasket
Screws