5.
To remove the recirculation pump mo-
tor capacitor:
a) Disconnect the two wire connectors
from the capacitor terminals.
b) Remove the mounting screw from the
capacitor and remove the capacitor from
the enclosure.
Screw
Recirculation Pump
Motor Capacitor
4-15
6.
To remove the electronic control board:
a) Disconnect the wire connectors from
the electronic control board terminals.
b) Squeeze the locking tab on each stand-
off while you pull the board off the
standoffs.
Electronic Control Board
TH1 TH2
Black White
Board Standoff
(1 Of 4)