KitchenAid KAR-13 Technical Education page 51

4. Remove the two end caps from the spray
assembly.
End Caps
Spray Assembly
5. Dilute approximately 5 oz. (148 ml) of
LIME-A-WAY
(3.8 lit.) of water.
6. Clean the caps and spray assembly. If the
spray nozzles are clogged, use a wire to
remove the clog, or use a suitable wire
brush.
7. Thoroughly rinse the spray assembly with
clean water.
8. Reinstall the two caps on the spray nozzle
assembly.
9. Reassemble the ice making components.
NOTE: During normal operation, if ice is stick-
ing to the evaporator plate, check the "weep"
holes in the top of the plate. The holes must be
open to allow ice to drop.
8-3
®
cleaner with 1 gallon
Weep Hole (1 of 24)
(Top Of Evaporator)