KitchenAid KAR-13 Technical Education page 25

NOTE: Before you remove the bin thermostat
sensing tube in the next step, note the way it is
routed.
14. From inside the ice maker, straighten the
end of the sensing tube, and pull it out of
the holder.
Heater Sleeving
Straighten End Of Sensing Tube
Sensing Tube Holder
15. Pull the sensing tube and heater out of the
rear of the unit, and remove the bin ther-
mostat.
REASSEMBLY NOTE: When you reinstall the
sensing tube and heater from the new bin
thermostat, make sure that you keep the
sleeving at the same location inside the ice
maker as the old sensing tube and heater.
4-11