Changing The Bin Door - KitchenAid KULSL85 Installation Instructions Manual

Changing the Bin Door and
Lower Panels
Ktoor
(26; mm)
Lower
DIMENSIONS
The storage bin door is designed to accept an optional decorative wood panel of your
choice. The wood panel should be no more than l/4 inch (6 mm) thick. Cut it to the same
size as the production metal panel.
To change the bin door panel:
1.
Open the bin door.
2.
Remove the two screws on top of the
door that secure the handle.
3. Remove the handle and handle insert.
4. Slide the metal panel out.
5. Break off all door insulation ribs to allow
room for the wood panel's thickness.
6. Slide the wood panel into the door
frame.
7. Replace the handle and screws.
To change the lower panel:
1.
Remove the three screws that hold the
lower panel assembly to the ice maker.
2.
Remove the two screws on the top of the
panel assembly.
Break off all door
insulation ribs to
accept Yi" (6mm)
thick wood panels
3. Slide the metal panels and spacers out.
4. Slide the wood panel into the door
frame.
5. Replace the top of the panel assembly.
NOTE:
Make sure the galvanized panel is
replaced in back of the panel assembly.
-
2