EXCELL PRECISION CO., LTD
CHAPTER 4 SERVICE MODE ACCESS
Set the jumper SWA1 on the main board to the ADJ position (EEPROM
v
UNLOCKED). Press and hold the
key. Release the
ON/ZERO
enter the service mode; the display shows
Set the SWA1 jumper back to the LOCK position when service configuration is
v
completed.
If the SWA1 jumper is set to its LOCK position during calibration, the scale exits
v
the service mode automatically.
Press the
Press the
Press the
SK-VET V1.0
ON/ZERO
key
ON/ZERO
key
ON/ZERO
key
ON/ZERO
⇒ Function Settings
.
key, followed by pressing the
TARE
key first and then the
Press the
Press the
⇒ Capacity Configuration
⇒ Weight Calibration
8
TARE
.
Press the
key
UNITS
key
UNITS
key
UNITS
SME300000067
key to