Self-Test Mode - Excell SI-132 User Manual

EXCELL PRECISION CO., LTD.
 The weight of a sample should be heavier than the 0.2d (d=division), or the arrow
pointing to the
 When the
or
count may contain errors.
 To power off in this mode, the scale will memorize the "Pcs" unit. When the scale is
powered on again, it directly enters the simple counting mode.
 While the "Auto unit weight average" function is available in the Advanced Function,
the goods on the weigh pan are 5pcs greater than the sample size and less than
double the sample size, the scale will automatically re-sample the unit weight.

1-4 Self-Test Mode

Set the switch SWA1 on the bottom of machine to the LOCK position.When power is off,
hold , and press
NET/GROSS
"Self-Test Mode".
Press ON/ZERO key
Press ON/ZERO key
Press ON/ZERO key
Press ON/ZERO key
INTERNAL VALUE MODE
 Press TARE to enter, and the display shows internal value
 Please check whether the internal value has changed obviously with weight
changing.
 Please check the backlight.
 Press ON/ZERO key to back to the last screen , the display shows
KEYPAD TEST MODE
 Press TARE to enter, display shows
Keypad's internal code: TARE key= 07 UNITS key= 06 NET/GROSS key=05
 Press ON/ZERO key to back to the last screen , the display shows
FIRMWARE VERSION DISPLAY MODE
 Press TARE to enter , display shows the firmware version
 Press TARE key again, the display shows maintenance number
 Press ON/ZERO key to back to the last screen, display shows
BACK TO THE LAST SCREEN
Press TARE key to exit self-test mode, the scale will restart automatically.
02005318
icon will be on.
are indicated, the scale is still operational but the
key, Wait till display shows
ON/ZERO
Press UNITS key
Press UNITS key
Press UNITS key
Press UNITS key
(must hook up Load Cell to test)
6
to enter
for 2 secs
ZSME300000298