US Robotics COURIER User Manual page 26

-
-
-
-
-
-
-
-
-
-
-
COURIER HIGH SPEED MODEMS
3. Now review the attached interfaces in Figure 2.3.
Figure 2.3-Connected Courier Modem
4. Check to make sure that the power switch is OFF; press it
towards the zero in the 0/1 icon on the bottom label. Plug
the power supply adapter's small connector into the power
jack at the back of the modem. Plug the adapter into a stan-
dard 115-volt AC wall socket.
Disconnect your present phone cable from the wall jack.
Plug one end of the phone cable that came with the modem
into the modem's phone jack that is near the wall-jack icon
on the bottom label. Plug the other end into the wall jack.
NOTE: Older telephone installations may not have the
appropriate modular wall jack and plug. Adapters and
RJl 1 C connectors are available from your telephone com-
pany or computer dealer.
If you want to keep your telephone connected for conven-
tional calls, plug its cord into the jack at the rear of the
modem near the phone icon. You can also use both your
Set-up and Testing 2-5