Index - US Robotics COURIER User Manual

-
-
-
-
-
-
COURIER HIGH SPEED MODEMS
INDEX
Commands
Bold-faced page numbers indicate the primary information source for an entry.
+++,return to Command mode, 6-9-6-10,
C-1, C-6
+FCLASS=n, Fax/Data mode, E-2, H-3
+FCLASS?, display mode, E-2, H-3
>,repeat, 6-9, C-6
/,pause, 6-5, C-6
$,basic command help, 8-7, C-6
&$,ampersand command help, 8-7, C-6
&A, enable ARQ result codes, 5-6-5-7, C-6
&B, DTE/DCE rate, 4-14, C-7
&C, Carrier Detect, 4-18, C-7
&D, Data Terminal Ready, 4-17, C-7
&F, load factory settings, 4-2, 5-2-5-3, C-8
&G, Guard tone, 6-13, C-8
&H, Transmit Data flow control, 4-7-4-8,
C-8
&I, Received Data software flow control,
4-9-4-10
I
C-8
&K, Data compression, 4-12-4-13, C-8
&L, leased line operation, C-8, E-16-E-18
&M, error control, 4-5, C-9
&N, DCE link rate, 4-15, C-9
&P, make/break ratio, 6-13, C-9
&R, Received Data hardware flow control,
4-9-4-10
I
C-10
&S, Data Set Ready, 4-16-4-17, C-10
&T, test options, C-10, App. F
&W, write to NVRAM, 5-1, C-10
&Y, break handling, 5-12, C-11
&Zn=L, write last-dialed number to
NVRAM, 6-8
&Zn=s, write number to NVRAM, 5-4, C-11
&Zn?, display phone number in NVRAM,
8-6, C-11
&ZC=s, store command string, 5-3-5-4, 7-5,
C-11
&ZC?, display stored command string, 8-6
%B, remote access, C-11-C-12, E-11-E-12
%C, remote access configuration control,
C-12, E-11
%F, configure data format, C-12, E-12
%Pn=s, password security, C-12, E-8
%R, Rack Controller Unit access, 4-18, C-11
% T, Touch-Tone recognition, 4-18, C-11
A, force answer mode, C-1, E-5
A/, repeat last command, 6-8, C-1
A>, continuous repeat, 6-8, C-1
Any key, terminate current opera ti on, 2-11,
6-3, 6-9, C-2
AT, attention command prefix, 2-8, C-1, C-2
B, handshake options, 4-2-4-3, 6-12-6-13,
C-2
C, disable transmitter, 5-11, C-2
D, dial, 3-5, 6-3, C-2
$,dial command help, 8-7, C-6
@,wait for an answer, 6-6, C-2
, (comma), pause, 6-4, C-2
I
(slash), short pause, 6-5, C-6
; (semi-colon), return to Command
mode, 6-5, C-2
"(quotation mark), dial letters, 6-5-6-6,
C-2
! (exclamation point), transfer call, 6-6,
C-2
P, pulse dial, 6-4, C-2
R, reverse frequencies, 6-7, C-2
T, Touch-Tone dial, 6-4, C-2
W, wait for second dial tone, 6-5
DL, dial last-dialed number, 6-8, 8-6, C-3
DS, dial number stored in NVRAM, 6-7,
C-3
E, Command mode local echo, 2-8, 5-9, C-3
F, online local echo, 5-9, C-3
H, on/off hook control, 6-11, C-3
I, inquiry options, 8-1-8-6, C-3
K, modem clock, 5-11, C-3
M, speaker control, 5-10, C-4
0, return online, 6-11, C-4
P, pulse dial, 6-4, C-4
Q, quiet mode, 5-5, C-4
5$, S-Register help, 8-9
Sr?, S-Register query, 8-6, C-4
Sr=n, set S-Register value, B-12, B-14, C-4
T, tone dial, 6-4, C-4
V, verbal/numeric mode, 5-5, C-4
X, result code options, 5-7-5-8, C-4-C-5
Z, reset to NVRAM settings, 5-3, C-6