Compatibility - US Robotics COURIER User Manual

COURIER HIGH SPEED MODEMS
nonvolatile memory and the factory defaults stored permanently
in read-only memory.
HELP Screens
The modem displays screens that summarize the command sets,
Dial command options, and S-register functions.
Bottom Panel Reference
-
-
-
-
Command summaries and other information are printed on the -
bottom of the modem case. A Dual In-Line Package (DIP) switch
guide makes it easy to tailor the switch settings to your terminal
or software requirements. -
Dialing the Last Dialed Number
The modem has a buffer that stores each dialed number until it -
is cleared by another Dial command. A few keystrokes cause the
modem to redial the number in the buffer without your having
to enter the number again. -
Automated Redialing
You can put the modem into Repeat Mode to continuously redial
if a previous dial attempt fails to connect. This is especially use-
ful in dialing services whose lines are often busy.
Quote Mode
Set the modem to Quote Mode if you want it to dial an alpha-
betic acronym instead of a numeric number.
COMPATIBILITY
The Courier adheres to the following standards, ensuring com-
patibility with a wide base of installed modems. Unless other-
wise indicated, HST, V.32 bis and Dual Standard modems all
conform to the listed standard.
USR-HST 16.SK, 14.4K/12K/9600/7200/4800 bps (Dual
Standard and HST modems)
CCITT V.32 bis 14.4K/12K/9600/7200/4800 bps (Dual
Standard and V.32 bis modems)
CCITT V.32
9600/ 4800 bps (Dual Standard and V.32 bis
modems)
CCITT V.22 bis 2400 bps
1-4 Features and Compatibility
-
-
-
-
-
-
-
-
-