US Robotics COURIER User Manual page 145

COURIER HIGH SPEED MODEMS
%Pn=s
%Pn?
%B3 1200 bps.
%B4 2400 bps.
%BS 4800 bps.
%B6 9600 bps.
%B7 19,200 bps.
%B8 38,400 bps.
%B9 57,600 bps.
%Cn
Configuration control.
%CO Defer configuration. This is the default.
Configuration changes are deferred until the call is
ended, and take effect for ensuing connections.
You do not need to enter this command; it is the
default unless you enter one of the following %C
values.
%Cl Revert configuration. Use this command to cancel
any configuration changes made during remote
access, and restore the original configuration.
%C2 Execute configuration. Use this command to force
configuration changes to take effect immediately,
during the current connection. We do not
recommend forcing immediate configuration
changes, as this can result in an unreliable
connection or even a loss of connection.
%Fn
Configure data format.
%FO No parity, 8 data bits.
%Fl Mark parity, 7 data bits.
%F2 Odd parity, 7 data bits.
%F3 Even parity, 7 data bits.
Set the following password string (s) at position
n (n
=
0 or 1).
Display the password stored at position
n (n
=
0 or 1).
C-12 Command Summary
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-