US Robotics COURIER User Manual page 123

COURIER HIGH SPEED MODEMS
S-REGISTER SUMMARY
USAGE
The default values are those users typically require. Change the
settings with the ATSr=n command, where r is the register and n
is a decimal value from 0-255:
ATS13=8 <Enter>
The modem does not perform a value-range check. Some values
you select may not work with some equipment, and you'll have
to readjust the settings.
To display the contents of a register, use ATSr? as in this
example:
ATS20? <Enter>
Register
Default Function
so
See DIP
Sets the number of rings on which to
Switch 5
answer when in Auto Answer Mode. SO=O
disables Auto Answer, the same as DIP
switch 5 ON (factory setting). SO=l
enables Auto Answer and the modem
answers on the first ring.
Sl 0
Counts and stores the number of rings
from an incoming call.
S2 43
Stores the ASCII decimal code for the
escape code character. Default character is
"+". A value of 128-255 disables the escape
code.
S3 13
Stores the ASCII decimal code for the
Carriage Return character.
S4 10
Stores the ASCII decimal code for the Line
Feed character.
SS
8
Stores the ASCII decimal code for the
Backspace character. A value of 128-255
disables the Backspace key's delete
function.
B-12 Summaries and Tables
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-