US Robotics COURIER User Manual page 129

COURIER HIGH SPEED MODEMS
-
-
Register
Default Function
Error control handshaking options: select the
total values of bits 4 and 5.
-
Bit 4 Bit 5 Result
0 0 Complete handshaking
-
sequence: V.42 Detection,
LAPM error controt MNP.
16 0 Disable MNP.
-
0 32 Disable V.42 Detection and
LAPM.
16 32 Disable Detection phase, if you
-
know that the remote modem
does LAPM, but not the
Detection phase.
-
S28 8 Sets the duration, in tenths of a second, of
the extra 3000
I
600 Hz answer tones sent
-
during V.32 handshaking. Default= 8 (.8
seconds). This gives V.32 modems
additional time to connect in V.32 mode
-
before timing out.
If there is difficulty answering older,
-
manually operated V.32 modems, for
example, modems that require a button to
be pushed in order to dial, try lengthening
-
the duration of the extra tones.
Setting S28 to zero eliminates the extra
-
tones, resulting in a faster connect time i(
for example, the modem is set to use V.21
modulation (300 bps) or V.23 modulation
-
(1200 bps). Sets the duration, in l/lOths of
a second, of the V.32 handshake.
S29 20 Sets the duration, in tenths of a second, of
-
the answer tones sent during V.21 hand-
shaking. Default= 20 (2 seconds). This
gives V.21 modems additional time to
-
connect in V.21 mode before timing out.
-
B-18 Summaries and Tables
-