One Touch; Speed Dial - Toshiba DP5000-series Quick Reference Manual

One Touch

To store a number on the One Touch button
1. Dial
2. Press a
3. Enter the number to be stored.
4. Press the
Note
Programmable Feature Button.
Paging
To make an All Call Page
1. With the handset off-hook, press
all phones in the All Call Page Group, and may page external
speakers (depends on programming).
2. Make your announcement, then hang up.

Speed Dial

To store a Station Speed Dial Number
1. Dial
2. Press
3. Enter a Speed Dial Code (
4. Enter the number to be stored (32 digits max.).
5. Press
6. Repeat steps 2~5 to add more speed dial numbers.
7. To end programming session, lift and replace the handset.
To clear a number from a Station Speed Dial code
Repeat the previous procedure skipping Step 4.
To make a call using Speed Dial
1. Lift the handset. Press
Number.
2. Access a outside line (if necessary).
Note
line before pressing
setup).
CAUTION!
Strata CIX DP5000-series Telephone Quick Reference Guide 11/07
#9876
.
One Touch
One Touch
One Touch buttons must be programmed on a
#9876
.
Spdial
.
Spdial
button to store the entry.
You may need to lift the handset and access an outside
Spdial
Do not use cleansers that contain benzene, paint
thinner, alcohol or other solvents on the
telephone's rubber feet. The color of the rubber
may transfer to the desk or mounting surface.
button.
button again.
All Call Page
100~199
Spdial
, then dial the Speed Dial
(depending on your telephone
. This pages
).
9